You can use a 600 volt panel to charge a 12 volt panel with a MPPT controller made for that voltage. That is why MPPT controllers are made.
600 volt MPPT
Try our solar cost and savings calculator
24v Panel 12v MPPT to charge 12v 4S LFP Battery
Collapse
X
-
24v Panel 12v MPPT to charge 12v 4S LFP Battery
Would it be good practice to use a 24v panel connected to 12v MPPT Charge Controller to charge LFP?
Higher panel voltage would have less loss or allow higher awg feed line.
Portable use would allow controller to be located closer to battery for shorter 12v run.
Panel could produce usable power in less ideal conditions.
Copyright © 2014 SolarReviews All rights reserved.
Powered by vBulletin® Version 6.1.0
Copyright © 2025 MH Sub I, LLC dba vBulletin. All rights reserved.
Copyright © 2025 MH Sub I, LLC dba vBulletin. All rights reserved.
All times are GMT-5. This page was generated at 06:58 PM.
Leave a comment: