Announcement

Collapse
No announcement yet.

Recommended MPPT Settings

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

  • Recommended MPPT Settings

    Hello. I am asking for some advice please?
    After hours and days of google I am looking for the recommended settings for 2 x 100AH 12V DEEP CYCLE AGM BATTERY I have connected in Series to give me 24V, 100amp, or should what I have work?
    I have 4 300w panels in two banks giving me between 50V and 70V on a good day at 600w
    Thanks


    MPPT.JPG

  • #2
    What is the make/model of you MPPT charge controller?

    Comment


    • #3
      use the numbers your battery came with, just double the voltage, because you are using 2 in series. If the battery spec calls for 13.2V,
      use 26.4 Simply double each voltage. Since I don't know what your battery calls for, I cannot approve the voltages in the charge controller presets.

      Powerfab top of pole PV mount (2) | Listeroid 6/1 w/st5 gen head | XW6048 inverter/chgr | Iota 48V/15A charger | Morningstar 60A MPPT | 48V, 800A NiFe Battery (in series)| 15, Evergreen 205w "12V" PV array on pole | Midnight ePanel | Grundfos 10 SO5-9 with 3 wire Franklin Electric motor (1/2hp 240V 1ph ) on a timer for 3 hr noontime run - Runs off PV ||
      || Midnight Classic 200 | 10, Evergreen 200w in a 160VOC array ||
      || VEC1093 12V Charger | Maha C401 aa/aaa Charger | SureSine | Sunsaver MPPT 15A

      solar: http://tinyurl.com/LMR-Solar
      gen: http://tinyurl.com/LMR-Lister

      Comment

      Working...
      X