Announcement

Collapse
No announcement yet.

Cambodian Energy

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

  • Cambodian Energy


    Hello, I'm doing a project for University, and I’m looking for some help. The goal of my project is to design a product that can provide electricity for people in Cambodia that have unreliable electricity, or haven't been connected to the grid yet. I need to get input from people who may have some insight about the issue, so I went to this board for a new perspective. Obviously, this forum will be more likely to recommend solar panels, but it would help if I could get some verbal feedback. If you have any questions, I would love to clarify anything about the project, but it would be a great help if you could take the survey I have attached. It takes less than five minutes, and doesn't ask for any personal information.

    https://forms.gle/3bsprodmcMpJBceP9

  • #2
    You must define the loads before designing a system.
    Powerfab top of pole PV mount (2) | Listeroid 6/1 w/st5 gen head | XW6048 inverter/chgr | Iota 48V/15A charger | Morningstar 60A MPPT | 48V, 800A NiFe Battery (in series)| 15, Evergreen 205w "12V" PV array on pole | Midnight ePanel | Grundfos 10 SO5-9 with 3 wire Franklin Electric motor (1/2hp 240V 1ph ) on a timer for 3 hr noontime run - Runs off PV ||
    || Midnight Classic 200 | 10, Evergreen 200w in a 160VOC array ||
    || VEC1093 12V Charger | Maha C401 aa/aaa Charger | SureSine | Sunsaver MPPT 15A

    solar: http://tinyurl.com/LMR-Solar
    gen: http://tinyurl.com/LMR-Lister

    Comment

    Working...
    X