Here's a brief picture of what I have, (I currently have to Renogy 100w panel on a 12v system. 2 SLI31AGM batteries plus the kit came with a PWM 30w charge controller. I have another Renogy 100w panel due in Thursday. Plus a power bright 2000 peak / 1000w continous pure sine wave AC-DC inverter.)
Now my question: All the parts of my system are no older than 2 weeks. Why when the battery is being recharged like today it said 13.1 and was still being charged, and when night fall came it now says 12.8. Both batteries are hooked in parallel both 100ah batteries. It seem to start when I hooked up a Amp gauge. So tonight I removed it as I wasn't sure what was going on. Any ideas?
Thanks,
Mike
Now my question: All the parts of my system are no older than 2 weeks. Why when the battery is being recharged like today it said 13.1 and was still being charged, and when night fall came it now says 12.8. Both batteries are hooked in parallel both 100ah batteries. It seem to start when I hooked up a Amp gauge. So tonight I removed it as I wasn't sure what was going on. Any ideas?
Thanks,
Mike
Comment