What do I set the battery parameters on my Charge Controller?

[Martin4321]

I have a MightMax 9Ahr battery. The specs on the battery says: Standby 13.63 - 13.8V and Cycle Use 14.5-14.9V. I have this charge controller: https://www.amazon.com/Controller-B...ocphy=9012114&hvtargid=pla-349062348230&psc=1

I have three settings I need to make on my charge controller. What should those settings be?
1. High Voltage Disconnect (PV off)
2. Low Voltage Disconnect (load off)
3. Load On

Thanks,

[Ampster]

I would start out conservatively with HVD of 14.5 and 12.0 for LVD. Load on sounds like a LVD reconnect voltage and could be higher than 12.1.

You need more information about the chemistry and absorb voltage before i would connect the charger for more than a few minutes. What is the resting voltage of the battery now?