Does anyone have any experience using battle born batteries with the Victron 12V/2000W Inverter/charger?
I have 3x 100ah LiFePO 4 battle born batteries and the Victron 12V/2000W Inverter/charger.
I have not changed any settings on the inverter. When I plug the inverter into shore power it will charge in bulk mode until the batteries reach 14.6V (watching with battery monitor), then it will change to absorption mode and what looks like "trickle charge" in absorption mode at around 1-2 amps keeping the batteries at around 14.3V. It did this for hours and never dropped down to float mode.
I don't have a laptop or a MK3-USB, but it's looking like I may need to pick these up.
I have 3x 100ah LiFePO 4 battle born batteries and the Victron 12V/2000W Inverter/charger.
I have not changed any settings on the inverter. When I plug the inverter into shore power it will charge in bulk mode until the batteries reach 14.6V (watching with battery monitor), then it will change to absorption mode and what looks like "trickle charge" in absorption mode at around 1-2 amps keeping the batteries at around 14.3V. It did this for hours and never dropped down to float mode.
I don't have a laptop or a MK3-USB, but it's looking like I may need to pick these up.
Comment