I have a Grand Design, Reflection 297RSTA Travel Trailer. Stock trailer has 50 amp 240V shore power connection that splits into 2 legs of 50 amp 120V's per each leg.
I'm trying to install a 12V, 300 amp LiFePo4 battery bank with a 12V, 5000 watt inverter (240vac input, split output 240/120vac 60hz).
I'm trying to figure out how to do the split wiring configuration from the inverter to the two 50 amp 120V legs to the circuit panel.
1. Diagram A1 shows wiring diagram for Dual-Phase Wiring Mode. It show shore power AC Power in with ground tied in to ground AC Power out. What should I do with the neutral wire from shore power?
2. Is the AC Power out from diagram A1 the input to AC Power in on diagram A2?
3. If question 2. above is correct, what device is diagram A2 and A3?
Any expert advice is greatly appreciated. Thx.
Screen Shot 2018-12-08 at 1.39.43 PM.pdf
Screen Shot 2018-12-08 at 1.24.18 PM.pdf
I'm trying to install a 12V, 300 amp LiFePo4 battery bank with a 12V, 5000 watt inverter (240vac input, split output 240/120vac 60hz).
I'm trying to figure out how to do the split wiring configuration from the inverter to the two 50 amp 120V legs to the circuit panel.
1. Diagram A1 shows wiring diagram for Dual-Phase Wiring Mode. It show shore power AC Power in with ground tied in to ground AC Power out. What should I do with the neutral wire from shore power?
2. Is the AC Power out from diagram A1 the input to AC Power in on diagram A2?
3. If question 2. above is correct, what device is diagram A2 and A3?
Any expert advice is greatly appreciated. Thx.
Screen Shot 2018-12-08 at 1.39.43 PM.pdf
Screen Shot 2018-12-08 at 1.24.18 PM.pdf
Comment