I have a Trailex open trailer for transporting my car to the race track. On the trailer I installed a deep cycle 12V battery which is used to power the winch, electric tongue jack and air compressor. The trailer has a 7 pin plug that attaches to my SUV, but it is not wired to deliver power to charge the battery. So, to ensure the battery stays charged, I picked up a 35 Watt solar panel (http://www.amazon.com/Watt-Solar-Pan...ilpage_o01_s00), a voltage regulator (http://www.amazon.com/DROK-Waterproo...ilpage_o00_s00) and a charge controller (http://www.amazon.com/Controller-Reg...ilpage_o02_s00).
The install went smoothly and everything seems to be working. However, the instructions that came with the charge controller are rather worthless. Am I supposed to leave the charge controller with the default settings or change something? I don't really understand how the settings on that unit work.
Thanks
The install went smoothly and everything seems to be working. However, the instructions that came with the charge controller are rather worthless. Am I supposed to leave the charge controller with the default settings or change something? I don't really understand how the settings on that unit work.
Thanks
Comment