I'm designing an off grid system for my RV.
My current battery bank config is two 200ah AGM's
I intend to wire a 30 amp plug to the inverter hooked to the battery bank and simply plug in the RV's shore power cable to the battery bank when not on shore power. Using the battery bank as though it was a shore power source.
The RV has a built in charging system (12v, 45a max).
I wish to charge the battery bank using the built in RV charger as well as by solar panels. This will allow the bank to be charged while the gennie is running or while on shore power as well as when the solar panels are used.
My question is - I think, from my research, that I should use two charge controllers, one for the 12v from the RV charger and another forthe solar panels.
What say you all?
My current battery bank config is two 200ah AGM's
I intend to wire a 30 amp plug to the inverter hooked to the battery bank and simply plug in the RV's shore power cable to the battery bank when not on shore power. Using the battery bank as though it was a shore power source.
The RV has a built in charging system (12v, 45a max).
I wish to charge the battery bank using the built in RV charger as well as by solar panels. This will allow the bank to be charged while the gennie is running or while on shore power as well as when the solar panels are used.
My question is - I think, from my research, that I should use two charge controllers, one for the 12v from the RV charger and another forthe solar panels.
What say you all?
Comment