Announcement

Collapse
No announcement yet.

6X6 cells

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

  • 6X6 cells

    I'm still in the planning stages for my panels.
    They'll be going on a van so I'd like to maximize the area coverage and wattage.
    The 6x6 cells look like the best choice for me, but I've seen that DeltaFox doesn't like them.

    What are the possible problems with these cells?

  • #2
    that's my choice . i have always had trouble with them . I bet I have broke about 15 to 20 fo these and it's my falt so I'm trying to stick with a different cell. Good luck to you if you use these.

    Comment


    • #3
      Thx Delta, but it's too late.
      I got impatient and ordered 108 of them.
      I'm waiting for them now.
      They're new ones, not the detabbed ones.

      I plan to use a low temp solder and leave weights on them until the solder cools.
      Hopefully that will prevent, or at least reduce, any warping.

      The glass will be an odd ball size, 57x27, to best fit the roof.
      I may have found a reasonably priced way to get normal tempered glass for them. If so I'll post a new thread.

      I'd still like to see a comparison of the plexy to low iron glass wattage's before I do any ordering (hint hint )

      Comment


      • #4
        Before you get started take pictures of all the steps that you take and then post it on this sight. Good Luck

        Comment

        Working...
        X