-
Cool I am glad I ran across you guys I have visited other forums but no one had possitive attatudes on replies cool
well I am thinking 156 cells 3x6 if I configure the cells to produce just 24v and most heavy on amps I think this can be be done by wiring using the combination of seires and Paralle I am tryign to avoid have indavidual pannels so I was thinking on making one pannel and connecting the cells them selve as I would having 2 panels the cells I will be using is 2 bus cells I am not sure of their production figures. I will look them up again and do some math.
I any case I will be mounting this on top of my well house and not sure of inverter I know I am going to loose some on my heat lose but I can counter act that by insulating.
I also will be looking into a solar modified pumps? this might also be possible.Leave a comment:
-
Going green starting with well water
I have plans to build a solar panel to run my well pump to start.
I am wanting to set it up with batteries and an inverter I plan to use 165 cells in the one panel with a dimension of 6x5 feet.
what wiring am I going to need.
I figure i will need my panel of coarse, and shut of switch, the batteries, and then the inverter.
Is there someone with some sort of input on what I am missing and what I can expect to gain out of this?
Working...
😀
😂
🥰
😘
🤢
😎
😞
😡
👍
👎
☕
Leave a comment: