Where could I get Tabbing Wires and Rosin Flux Pen?

[rdlrn19]

Hi

My name's Ricardo and I'm new building solar panels.

I'm worried because I don't know what I'm going to do if my Rosin Flux Pen finish, because I search here in my city but nobody know what is that So I don't know where could I get one Rosin Flux Pen (I live in Tamaulipas, Mexico)

Also I don't know where to get tabbing wires, I don't found here in my city

So I want to know what other thing could I use instead of tabbing wires and rosin flux pen?

And sorry for my bad english.

Thanks

[SonofSol]

Hi

My name's Ricardo and I'm new building solar panels.

I'm worried because I don't know what I'm going to do if my Rosin Flux Pen finish, because I search here in my city but nobody know what is that So I don't know where could I get one Rosin Flux Pen (I live in Tamaulipas, Mexico)

Also I don't know where to get tabbing wires, I don't found here in my city

So I want to know what other thing could I use instead of tabbing wires and rosin flux pen?

And sorry for my bad english.

Thanks

Digikey.com sells flux pens
You can use a good quality rosin core electronic solder too, though I am sure some will say this is a "NONO" it will work just fine
I do not know where you can get these items in Mexico
I have seen people use copper foil sheets cut with a sissors or on a paper cutter to make their tabbing wire and tin them by hand

http://rocky.digikey.com/WebLib/Kester/Web%20Photos/83-1000-0951.jpg

http://parts.digikey.com/1/parts/955608-flux-pen-formula-951-no-clean-83-1000-0951.html

[rdlrn19]

what could I use instead of tabbing wire ?

[SonofSol]

what could I use instead of tabbing wire ?

Well like I said, you may be able to buy some sheet copper, it should be thicker than foil but must be soft. you can use this once you coat each oiece you cut, iyt is a lot of work, but can be done.
The only place I know of to get tabbing wire is on Ebay

http://stores.ebay.com/heartofthesunsolar

This is one of many that sell solar panel building supplies
I hope that helps
Peace.... !! have fun building

[rdlrn19]

thanks for your help

[SonofSol]

Well like I said, you may be able to buy some sheet copper, it should be thicker than foil but must be soft. you can use this once you coat each oiece you cut, iyt is a lot of work, but can be done.
The only place I know of to get tabbing wire is on Ebay

http://stores.ebay.com/heartofthesunsolar

This is one of many that sell solar panel building supplies
I hope that helps
Peace.... !! have fun building

http://myworld.ebay.com/basiccopper/

For coper sheet
I do not know if they ship to Mexico

[SonofSol]

thanks for your help

How do you say? No I problama? sorry my Espa

[rdlrn19]

"No hay problema"