Hello people, this is my first post here.
I am building a new solar panel system for my home. I already bought 2 solar panel model SYP190S-M more info here for the datasheet http://www.allecoenergy.co.uk/newsle..._Datasheet.pdf
I am planning later to add one more solar panel so total is 3 panel connected in paralell. not planning to use offgrid etc.
It seems that the panel solar are 36 volts which i initially told was 12volts by the vendor.
So i am planning to buy a controller that support 24 volts input and plan to run the system with a 12 volts battery each 200am. I guessed it should
be connected in series to acheive 24 volts? Do you think MPPT controller are better than normal PWM ??
i am planning to buy an inverter 3000w pure sine wave from china and get all connected. More info on the inverter http://lumiax.en.alibaba.com/product...ter_3000W.html
the inverter i am planning to buy is here http://lumiax.en.alibaba.com/product...ontroller.html
inverter will be 24 volts and convert to 230
does anyone know if this is proper setup? i need some help from you.
Thanks for your feedback.
Sebastien
I am building a new solar panel system for my home. I already bought 2 solar panel model SYP190S-M more info here for the datasheet http://www.allecoenergy.co.uk/newsle..._Datasheet.pdf
I am planning later to add one more solar panel so total is 3 panel connected in paralell. not planning to use offgrid etc.
It seems that the panel solar are 36 volts which i initially told was 12volts by the vendor.
So i am planning to buy a controller that support 24 volts input and plan to run the system with a 12 volts battery each 200am. I guessed it should
be connected in series to acheive 24 volts? Do you think MPPT controller are better than normal PWM ??
i am planning to buy an inverter 3000w pure sine wave from china and get all connected. More info on the inverter http://lumiax.en.alibaba.com/product...ter_3000W.html
the inverter i am planning to buy is here http://lumiax.en.alibaba.com/product...ontroller.html
inverter will be 24 volts and convert to 230
does anyone know if this is proper setup? i need some help from you.
Thanks for your feedback.
Sebastien
Comment