AC connector for Aero Sharp Inverter?

[empty_meter]

Have an old aero Sharp inverter.
Missing the connector to connect to the AC plug.

Any idea if this is a standard connector if I know the term to search for?
if not, any suggestions on an easily available plug type to swap this over to?

(240VAC 50Hz rating required)

(unless Aero sharp were really silly I would expect they used an industry standard connector)

[bcroe]

A standard approach is feed through an AC disconnect switch and wire directly into the
feeding breaker. Bruce Roe

[empty_meter]

thanks. appreciate the external wiring of inverter : disconnect switch : switchboard(breaker)

I am referring to the cable connection on the inverter. As per the photo above, the termination point is not bare cable terminal. The connection point is some (unusual to me) connector.

I am hoping someone will recognise the connector type as we have not been able to identify it. Would prefer not to open the case and replace the existing connector.

[Sunking]

Cannot see the connector type, but you will be using a SO Power cord.