Good day,
I've installed a 24V solar system consisting of 5 solar panels, a battery bank with 8 x 102Ah deep cycle batteries, 2 x 5 - 30A solar charger controllers and 3000W x 24V pure sine wave inverter. Solar power is generated with 5 panels (2 x 120W x 12V connected in parallel to deliver 24V and 3 x 300W x 24V panels.) This is a manual switch-over system and is in use from 6pm to 6am daily.
Unfortunately 2 of the 300W x 24V panels were stolen. The only panels available to me are 300W x 48V panels and I'm not sure if it is possible to connect them to my existing 24V system.
Needless to say apart from being a total novice I'm not in a financial position to upgrade my system to a 48V one.
Could someone please assist/guide me how to go about to step-down the 48V to 24V and salvage my existing installation?
Many thanks!
Try our solar cost and savings calculator
How to connect 48V panels to 24V installation
Collapse
X
-
How to connect 48V panels to 24V installation
Last edited by Louis; 06-13-2017, 08:54 AM.
Copyright © 2014 SolarReviews All rights reserved.
Powered by vBulletin® Version 6.1.3
Copyright © 2025 MH Sub I, LLC dba vBulletin. All rights reserved.
Copyright © 2025 MH Sub I, LLC dba vBulletin. All rights reserved.
All times are GMT-5. This page was generated at 09:59 PM.