Hi all i finally got my 45A MPPT Charge controller...I have 1 question. I am connecting two 125AH sealed AGM batteries to the CC and i have an EQUALIZING option on the CC. Should i enable the equalizing feature IF the batteries im using are sealed AGM?
Try our solar cost and savings calculator
Morningstart MPPT TS45 45A MPPT Charge Controller Questions
Collapse
X
-
-
-
Comment
-
Generally speaking you do not EQ an AGM. Some AGM do allow what they call a Conditioning Charge which is a fancy word for Equalize when the battery has capacity loss, but rarely ever applied. But only time one would ever apply a higher voltage is Initially when first put into service. Consult your battery manufacture Owners Manual and do not do what anyone on the web tells you to do. .MSEE, PEComment
-
Generally speaking you do not EQ an AGM. Some AGM do allow what they call a Conditioning Charge which is a fancy word for Equalize when the battery has capacity loss, but rarely ever applied. But only time one would ever apply a higher voltage is Initially when first put into service. Consult your battery manufacture Owners Manual and do not do what anyone on the web tells you to do. .
No mention in the manual about Equalizing/Conditioning Charge. I am going to send them an email to see what they say.Comment
-
IMHO that can only mean no EQ. Only a couple of manufactures recommend it, and those that do is a last resort to try to save a dead battery. Sort of like putting someone on life support in a Coma with no chance of reviving or waking up.MSEE, PEComment
-
Comment
Copyright © 2014 SolarReviews All rights reserved.
Powered by vBulletin® Version 6.1.0
Copyright © 2025 MH Sub I, LLC dba vBulletin. All rights reserved.
Copyright © 2025 MH Sub I, LLC dba vBulletin. All rights reserved.
All times are GMT-5. This page was generated at 11:49 AM.
Comment