How to string: series of panels to junction to disconnect to + and - generator ports.

[PaulaK]

4 panels in series. With the female mc4 end of the end panel which they diagram as - will get the black pv cable (male mc4) to the junction box. Then a wago black connection to be "threaded" to an inside disconnect. The black negative cable that goes into the disconnect has a male mc4. So I put a female mc4 on the end of the black cable that ran from the junction box. out of the disconnect black is a female mc4. so I put a male mc4 into this and the end I put a female mc4 and stick it in the male negative port on my generator?
Panel -female, black cable male to junction box, wago nut, conduit to house, female mc4 crimped onto the end, into the disconnect black (-) male mc4, out diconeected mc4 is female. Make a cable with male into this and female on the opposite end that goes into the male (-) negative generator port inlet plug.