I am planning a small diy micro-inverter setup with one string of 12 x IQ7 micro-inverters. Since I only have one circuit I don't need the Enphase combiner box, which is expensive as well, but I need a way to transfer from the Q cable to a junction box. Specifically what type of sealing fitting it used? For a roof junction box I am planning a Soladeck AC pass-through.
I have a very small house so this small 3.48 kW setup fits my needs.
Background information:
12 Solarworld 290 blk/blk
IronRidge racking
12 IQ7 micros.
$0.08/kWh solar production payment through the local energy company. This is what is driving the small system size, the program limits the array size to 120% of your yearly usage. I have a small (newish) and decently energy efficient house so my yearly usage has been small.
Thanks
I have a very small house so this small 3.48 kW setup fits my needs.
Background information:
12 Solarworld 290 blk/blk
IronRidge racking
12 IQ7 micros.
$0.08/kWh solar production payment through the local energy company. This is what is driving the small system size, the program limits the array size to 120% of your yearly usage. I have a small (newish) and decently energy efficient house so my yearly usage has been small.
Thanks