Where can I get solar panel frames for mounting solar cells?

[Ishmael4arms]

Aluminum Frames

I'm from an aluminium extrusion company making aluminium solar panel frames.if there's anything I can do for anyone here,please contact me.

I am trying to start building panels .. I would love help especially with the frames

[Ishmael4arms]

I am very interested also in the aluminum frames

[kyp279]

I'm from an aluminium extrusion company making aluminium solar panel frames.if there's anything I can do for anyone here,please contact me.

I am interested! pm me

[russ]

Those videos are somewhat misleading - if you watch a carpenter build a cabinet it looks easy - his skill set and level is far above that of most people.

[UtahDan]

Solar panel frames

I am at the beginning of putting together a solar panel array so I have been gathering information. The following site has panels of differentsizes (with or without glass panes) for sale: http://www.affordablesolarframes.com/. Seems like it would be easy enough to make your own having seen how this fellow does it.

[russ]

To see how someone else made a panel - http://fieldlines.com/board/index.ph...,144982.0.html

They seemed to have done it reasonably well.

[pauls1776]

how

how did you get on with the chinese frames please...very interested in the whole process.
thanks.pau.

[Jim7630]

Also want aluminum frames

Welcome.
simple, direct answers to questions are welcomed by vendors. Thank you.

I recently bought the xxxxxxx DVD for building solar panels, but it used wood for the frames. I've seen an instruction video elsewhere using aluminum but have lost track of it. Can anyone direct me to instructions for building metal frames?

[Mike90250]

this is still Edmond Wong,I'm new here.something wrong with my last ID,please contact me

Mod note - If you wish to participate fine - if you wish to market advertising may be available.

in the member profile area, is a field for your email address, and a selection, if yo wish to make it public or private.

addresses in posts are not allowed, because spambots crawl the web, searching for email address to spam, hack, or impersonate.

[Russel]

you have to have 10 posts i guess to send private messages that is why.

[Russel]

how do I contact you?

i'm interested, but how do I contact you? please send me a private message.

[Mike90250]

I'm from an aluminium extrusion company making aluminium solar panel frames.if there's anything I can do for anyone here,please contact me.

Welcome.
simple, direct answers to questions are welcomed by vendors. Thank you.

Hi, I want to make DIY solar panels but I can't find anyone that sells the frames that I need.

aluminium solar panel frame

I'm from an aluminium extrusion company making aluminium solar panel frames.if there's anything I can do for anyone here,please contact me.

[Naptown]

Well if you have the same codes and consumer laws in PR that we do in the USA, it is a moot point about a DIY panel, it is not going to happen then now is it?

Perhaps we need a illegal Solar Panel Forum for you huh? Kind of like one of those "How To Grow You Own Weed" forums.

Gee did we give Puerto Rico it's independence?
Last time I checked it was a territory still.

[elect41]

Home Constrution Are Differently

Our homes here in Puerto Rico,are all concrete and our roofs are real safe to have diy panels,we would not get incentives or tax credits if the system is diy,but we can install them at our own risk, but if its a gridtie system we have to follow the codes in order to register the solar system with local power authorities ,and benefit from net metering.

If our home is offgrid {no power company] home owner are responsible for theyre actions.but it can be done with an appropiate certified solar installer.