Tweet
I have Garden Led Solar Light with a small circuit board approximately .75 inches sq. With an on/off switch. There are 6 wire connections on the board. 4 have broken off the two connected wires are for the solar cell. I can locate where the 4 wires broke away from the board. I would like to know which source wires belong in which ,location on the board.
I would appreciate some advice on what to look for on the board to assist me in reconnecting the wires. I have included the name on the board if this helps GLM-6601V6
Thank You
I would appreciate some advice on what to look for on the board to assist me in reconnecting the wires. I have included the name on the board if this helps GLM-6601V6
Thank You
Comment