Hi, this is my fist post question here on this forum. I am an electrician up in the fine state of Alaska. I have design and built several off grid systems for remote operation the largest has 35 panels and runs an entire camp. I am in the process of addressing a possible voltage error with a SW4048. I can verify any inaccuracies however does anyone know if the SW has any rheostats or something to bring the SW back inline with the correct readings?
Announcement
Collapse
No announcement yet.
Trace SW4048 technical question
Collapse
X
-
Hi and welcome. I don't know anything about the SW4048, sorryPowerfab top of pole PV mount (2) | Listeroid 6/1 w/st5 gen head | XW6048 inverter/chgr | Iota 48V/15A charger | Morningstar 60A MPPT | 48V, 800A NiFe Battery (in series)| 15, Evergreen 205w "12V" PV array on pole | Midnight ePanel | Grundfos 10 SO5-9 with 3 wire Franklin Electric motor (1/2hp 240V 1ph ) on a timer for 3 hr noontime run - Runs off PV ||
|| Midnight Classic 200 | 10, Evergreen 200w in a 160VOC array ||
|| VEC1093 12V Charger | Maha C401 aa/aaa Charger | SureSine | Sunsaver MPPT 15A
solar: http://tinyurl.com/LMR-Solar
gen: http://tinyurl.com/LMR-Lister
Comment