Anyone has ideas/suggestions on what can be done to fix the monitoring/reporting problem. I am thinking even if I force the installer to replace the two panels we might still have the same issue.
Most Popular Topics
Collapse
Need help with troubleshooting two panel issues - solaredge
Collapse
X
-
-
I would guess the reporting problem is with the optimizers on those panels, not the panels themselves. New optimizers usually cost $50-$60 ea, and shouldn't be too difficult to swap out on a ground mount like yours.CS6P-260P/SE3000 - http://tiny.cc/ed5ozxComment
-
start with a ticket to solaredge and as part of that ask them to upgrade the firmware as well as look into the wattage issues.OutBack FP1 w/ CS6P-250P http://bit.ly/1Sg5VNHComment
-
Have you seen something like this before? Optimizer power reporting correctly, optimizer energy reporting wrong?CS6P-260P/SE3000 - http://tiny.cc/ed5ozxComment
-
Comment
-
Failed pv modules you get 1/3 or 2/3 or 1/4 less power or no power
failed optimizer you get strange data or no data. Sometimes firmware upgrade will help optimizer issues.
OutBack FP1 w/ CS6P-250P http://bit.ly/1Sg5VNHComment
-
Hi I have a south facing panel that appears to be producing lower than the others. One picture is daily production and the other is total production which has been on 3 days now. Any thoughts? Should I be worried ?Comment
-
Step 1 is always to review the daily playback and see if power lags all day, or in a particular pattern. Do you have a public Solaredge site?
Edit: the production of that panel looks a lot like the West facing panels. Are you sure the layout is accurate showing it facing south?CS6P-260P/SE3000 - http://tiny.cc/ed5ozxComment
-
Step 1 is always to review the daily playback and see if power lags all day, or in a particular pattern. Do you have a public Solaredge site?
Edit: the production of that panel looks a lot like the West facing panels. Are you sure the layout is accurate showing it facing south?
Update I went to solaredge site I could generate a new API key so I did play back and I noticed after 2:00 pm it starts working a lot lower power but before 2 p.m. its normalLast edited by Afrmthabay; 09-26-2017, 12:45 AM.Comment
-
CS6P-260P/SE3000 - http://tiny.cc/ed5ozxComment
-
As the sun gets more and more west, that module gets more shade.OutBack FP1 w/ CS6P-250P http://bit.ly/1Sg5VNHComment
-
Copy that makes sense thanks I was trying to upload my info to pvoutputs I have all the info including API key I feel I am missing something or not doing something as my live output does not display just my manual for yesterday. I uploaded a few screenshots any help would be a
Comment
-
-
Copy that makes sense thanks I was trying to upload my info to pvoutputs I have all the info including API key I feel I am missing something or not doing something as my live output does not display just my manual for yesterday. I uploaded a few screenshots any help would be aOutBack FP1 w/ CS6P-250P http://bit.ly/1Sg5VNHComment
-
Yeah, look at this. When I try to do an API call using the information you posted, it gives an error consistent with an incorrect or invalid key.CS6P-260P/SE3000 - http://tiny.cc/ed5ozxComment
Comment