If I was setting up an array, and given the 2 choices, I'd use Morningstar
Powerfab top of pole PV mount (2) | Listeroid 6/1 w/st5 gen head | XW6048 inverter/chgr | Iota 48V/15A charger | Morningstar 60A MPPT | 48V, 800A NiFe Battery (in series)| 15, Evergreen 205w "12V" PV array on pole | Midnight ePanel | Grundfos 10 SO5-9 with 3 wire Franklin Electric motor (1/2hp 240V 1ph ) on a timer for 3 hr noontime run - Runs off PV ||
|| Midnight Classic 200 | 10, Evergreen 200w in a 160VOC array ||
|| VEC1093 12V Charger | Maha C401 aa/aaa Charger | SureSine | Sunsaver MPPT 15A
Where am from they have it here everywhere (Yemen) it is taiwan like Morningstar cost around 450 US for 3k but it will give u only 2.4k
Good to know. The industry could use cheaper high voltage MPPT charge controllers. Right now there are only two on the market (MS and Schneider) and they are both very pricey (>$1300.)
Comment