Announcement

Collapse
No announcement yet.

Hanwha 240 panels for .39 a watt and other DIY qs

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

  • #16
    Originally posted by Dsspro View Post
    any suggestions for dealing with the snow? I believe it is a 6/12 or 7/12 roof.
    Slope, gaps between panels for the snow to go (or monolithic to get it off the roof at once) Sliding snow carries a lot of energy (weight and speed) and can smash stuff it falls on.
    pic of my half melted panels:
    20170103_083322.png

    Powerfab top of pole PV mount (2) | Listeroid 6/1 w/st5 gen head | XW6048 inverter/chgr | Iota 48V/15A charger | Morningstar 60A MPPT | 48V, 800A NiFe Battery (in series)| 15, Evergreen 205w "12V" PV array on pole | Midnight ePanel | Grundfos 10 SO5-9 with 3 wire Franklin Electric motor (1/2hp 240V 1ph ) on a timer for 3 hr noontime run - Runs off PV ||
    || Midnight Classic 200 | 10, Evergreen 200w in a 160VOC array ||
    || VEC1093 12V Charger | Maha C401 aa/aaa Charger | SureSine | Sunsaver MPPT 15A

    solar: http://tinyurl.com/LMR-Solar
    gen: http://tinyurl.com/LMR-Lister

    Comment

    Working...
    X