I'm trying to configure two 24v battery bank of 8-6v s-550 batteries. Is the diagram correct?
2 x 24v - 6v battery bank configuration
Collapse
X
-
-
Technically yes but you are missing a fuse between the Battery and Controller. You want two fuses mounted directly on the Battery Term Post. One for the Controller, and one for the Load (Inverter) .
If you must use parallel battery configuration Click This Link and use method 2. One thing missing in Smart Gauge method 2 is where to connect the charge side. It goes on the opposite corners.
Although not exactly what you are doing, the drawing below is how the fuses are placed.
Last edited by Sunking; 05-08-2018, 05:02 PM.MSEE, PE
Comment