Hi guy's, i hope this is the right place to post this.
I have a victron multiplus 3000k 70 24v inverter and was wondering how i would wire it up to start my generator. The geny is a sdmo elize 9000.
I have read a bit about the relay and virtual switch but just cannot get my feeble brain around it.
Is there any one out there with a couple of pictures that will help me pllleeeaasseee.
I have a victron multiplus 3000k 70 24v inverter and was wondering how i would wire it up to start my generator. The geny is a sdmo elize 9000.
I have read a bit about the relay and virtual switch but just cannot get my feeble brain around it.
Is there any one out there with a couple of pictures that will help me pllleeeaasseee.