What do u guys think about using a SolarEdge wave inverter instead of spending up to $1,500-$2,000 in upgrading the panel?
SolarEdge wave inverter !
Collapse
X
-
-
-
Comment
-
Comment
-
Comment
-
Comment
-
Comment
-
I was trying to say if that inverter uses a smaller breaker then does it make sense to use that in order to skip upgrading the panel?
I want to make sure itComment
-
What is wrong with this site? It only posts whatever gets typed before the auto save. How annoying.Comment
-
I want to make sure using this inverter to prevent a panel upgrade is the right information that was given to me before I spend money on something that wonComment
-
It is the apostrophe. I get it all the time from my iPad auto putting in the apostrophe and the web forum cuts off the post at that point when you save. Seems t have started about a month ago.OutBack FP1 w/ CS6P-250P http://bit.ly/1Sg5VNHComment
-
forum anti spam protection. non-standard chars trigger truncation. not much issue with windows pc's but phones with non-usa based os are likely to be using non-std chrsPowerfab top of pole PV mount (2) | Listeroid 6/1 w/st5 gen head | XW6048 inverter/chgr | Iota 48V/15A charger | Morningstar 60A MPPT | 48V, 800A NiFe Battery (in series)| 15, Evergreen 205w "12V" PV array on pole | Midnight ePanel | Grundfos 10 SO5-9 with 3 wire Franklin Electric motor (1/2hp 240V 1ph ) on a timer for 3 hr noontime run - Runs off PV ||
|| Midnight Classic 200 | 10, Evergreen 200w in a 160VOC array ||
|| VEC1093 12V Charger | Maha C401 aa/aaa Charger | SureSine | Sunsaver MPPT 15A
solar: http://tinyurl.com/LMR-Solar
gen: http://tinyurl.com/LMR-ListerComment
Comment