Announcement

Collapse
No announcement yet.

Large and small panel connecting

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

  • Large and small panel connecting

    Hello

    How is it possible to combine large and small panels in the same string. Do they have to be of the same amperage or voltage.



    http://www.solarstone.ee/gallery





  • #2
    The product sheet only mentions a single size.
    OutBack FP1 w/ CS6P-250P http://bit.ly/1Sg5VNH

    Comment


    • #3
      it's pointless to put panels where the chimney shadow blocks the sun.
      Panels in parallel need to be the same voltage, panels in series need to be the same amperage
      Powerfab top of pole PV mount (2) | Listeroid 6/1 w/st5 gen head | XW6048 inverter/chgr | Iota 48V/15A charger | Morningstar 60A MPPT | 48V, 800A NiFe Battery (in series)| 15, Evergreen 205w "12V" PV array on pole | Midnight ePanel | Grundfos 10 SO5-9 with 3 wire Franklin Electric motor (1/2hp 240V 1ph ) on a timer for 3 hr noontime run - Runs off PV ||
      || Midnight Classic 200 | 10, Evergreen 200w in a 160VOC array ||
      || VEC1093 12V Charger | Maha C401 aa/aaa Charger | SureSine | Sunsaver MPPT 15A

      solar: http://tinyurl.com/LMR-Solar
      gen: http://tinyurl.com/LMR-Lister

      Comment


      • #4
        I wonder if there are some kind of parallel connectors to connect the 1/2 panels, making them into whole ones?
        ​If this array was facing true solar south the chimney shouldn't come into play except early and late in the day during the summer season.
        2.2kw Suntech mono, Classic 200, NEW Trace SW4024

        Comment

        Working...
        X