Solar Tom in Brisbane

Collapse
X
Collapse
 
  • Page of 1
  • Time
  • Show
Clear All
new posts
Previous template Next
  • Tomte_AUS
    Junior Member
    • Nov 2018
    • 2
    #1

    Solar Tom in Brisbane

    Hi all,
    thanks for letting me join this Forum! I must admit my reasons for joining are a but selfish. I just recently bought a flexible 100W panel from Renogy to be installed on my camper. Upon its arrival I saw stains inside the panel and was wondering whether you could tell me what they are. They look like crystaline rings of about 1cm radius.
    I was hoping somebody in here could tell me what those are.

    Cheers,
    Tom
    Attached Files
    Tags: None
    • Mike90250
      Moderator
      • May 2009
      • 16020
      #2
      Bubba's boot print ? To me, they look like spots that the pane got crushed. But i can't see the texture of it, so maybe it's OK. Take it out in the sun and see what the voltage is, and short circuit amps are.
      Powerfab top of pole PV mount (2) | Listeroid 6/1 w/st5 gen head | XW6048 inverter/chgr | Iota 48V/15A charger | Morningstar 60A MPPT | 48V, 800A NiFe Battery (in series)| 15, Evergreen 205w "12V" PV array on pole | Midnight ePanel | Grundfos 10 SO5-9 with 3 wire Franklin Electric motor (1/2hp 240V 1ph ) on a timer for 3 hr noontime run - Runs off PV ||
      || Midnight Classic 200 | 10, Evergreen 200w in a 160VOC array ||
      || VEC1093 12V Charger | Maha C401 aa/aaa Charger | SureSine | Sunsaver MPPT 15A

      solar: http://tinyurl.com/LMR-Solar
      gen: http://tinyurl.com/LMR-Lister

        Comment

        Previous template Next
        Working...