Announcement

Collapse
No announcement yet.

Setting up a "Generator Warm" up time using Schneider AGS and COM Box

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

  • Setting up a "Generator Warm" up time using Schneider AGS and COM Box



    Wondering if anyone here has successfully set up a "Generator Warm" up time before loading, using Schneider AGS and COM Box.
    I find it hard to believe that Schneider did not build in a warm up time setting in the older COM Box. Supposedly it is built into the Gateway and Insight.....
    Appreciate any feedback from anyone here that may have been down this road before.
    John
    Last edited by sdold; 09-22-2021, 01:37 PM. Reason: Moved from another thread

  • #2
    Originally posted by ligwyd View Post

    Wondering if anyone here has successfully set up a "Generator Warm" up time before loading, using Schneider AGS and COM Box.
    I find it hard to believe that Schneider did not build in a warm up time setting in the older COM Box. Supposedly it is built into the Gateway and Insight.....
    Appreciate any feedback from anyone here that may have been down this road before.
    John
    What does the COM box do?

    Comment

    Working...
    X