Announcement

Collapse
No announcement yet.

System grounding

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

  • System grounding

    I'm using method 3 from Magnum's manual ( https://www.magnum-dimensions.com/si...PAE-Series.pdf ) to ground my system and devices. That is, chassis busbar and neutral busbar, and both to 8ft ground rod using 4awg ground wire. The issue I ran into today, though, is that I ran out of that 4awg so I was unable to ground battery banks from/in their battery box. Instead, I connected remaining 4awg directly to Inverter negative terminal and then to busbar. I did not turn on system.

    Will that work or do I need to connect to battery negative further away from inverter?
    Last edited by -robw-; 09-17-2019, 11:20 PM.

  • #2
    Picture says a thousand words?
    Attached Files

    Comment


    • #3
      I was advised by Magnum that this is fine. Activation day!

      Comment

      Working...
      X