So I've slowly been piecing together my system - here's what I've got so far, feel free to chirp in and tell me if anything is wrong...
4 x Panasonic HIT-N285 Panels, will be wired 2S2P, 6mm cable from panels to controller.
Outback Flexmax 80, 4AWG marine cable to batteries into a Blue Sea 80amp fuse.
4 x Rolls S-550 6 volt batteries for 24volts linked together with the same 4awg cable.
Blue Sea 100amp fuse with 2 outputs out - 1 to a Victron 24volt inverter charger roughly around 1000w and other feed to the house fusebox feeding LED lights, UV system @ 33w for killing the bacteria from the well water.
All cabling will be done in 4awg - any runs are not over 10m.
What am i missing out?!!??!
Cheers
4 x Panasonic HIT-N285 Panels, will be wired 2S2P, 6mm cable from panels to controller.
Outback Flexmax 80, 4AWG marine cable to batteries into a Blue Sea 80amp fuse.
4 x Rolls S-550 6 volt batteries for 24volts linked together with the same 4awg cable.
Blue Sea 100amp fuse with 2 outputs out - 1 to a Victron 24volt inverter charger roughly around 1000w and other feed to the house fusebox feeding LED lights, UV system @ 33w for killing the bacteria from the well water.
All cabling will be done in 4awg - any runs are not over 10m.
What am i missing out?!!??!
Cheers
Comment