8x 250watt panels how to wire to outback

[mudturtle]

i have a 2kw system which is 8x 250watt 36 volt panels through a sunny boy wired in series but I am buying a flex 80 outback this week now what is the best way to wire this up using my existing panels 2 strings series parallel
thanks

[Sunking]

2 x 4

[mudturtle]

overvoltage the outvback as a 150 volt max

[littleharbor]

2 x 36 = 72 volts x 4 strings. What's your battery voltage?

[Sunking]

overvoltage the outvback as a 150 volt max

Like I said 2S4P aka 2 x 4

That had better be a 24 or 48 volt battery or else I got real bad news for you.

[mudturtle]

24 volt battery bank the panels are voc 38.00v,isc 8.78avmp 30.50v,imp 8.20a hope this helps and 2x4 is easier for me to sort out and thank you for all your time

[Sunking]

24 volt battery bank the panels are voc 38.00v,isc 8.78avmp 30.50v,imp 8.20a hope this helps and 2x4 is easier for me to sort out and thank you for all your time

If not to late, use 48 volts. At 24 volts you are maxed out 2000 watts. At 48 volts you can go to 4000 watts if needed to expand later. It does not cost you anything extra going 48 volts, in fact less expensive a little.