Few noob question

[canuck4everr]

Hello wondering if my cables from charge controller to solar panels are the right 10 awg for about 22 feet .....2 100 watt panels in parrallel ......projecta idc 25 CC......

I hooked it all up and when it was bright out the projecta made wierd noises , but the lights were ok . listen here

panels https://www.amazon.ca/gp/product/B00...?ie=UTF8&psc=1

cable https://www.amazon.ca/gp/product/B00...?ie=UTF8&psc=1

CC https://www.projecta.com.au/dual-battery-charger-idc25/

charge controller specs [TABLE]
[TR]
SPECIFICATIONS [/TR]
[TR]
[TD="width: 28%, colspan: 1"]PART NO[/TD]
[TD="colspan: 3"]IDC25[/TD]
[/TR]
[TR]
[TD="colspan: 1"]CHARGE TYPE[/TD]
[TD="colspan: 3"]3 Stage[/TD]
[/TR]
[TR]
[TD="colspan: 1"]ALTERNATOR INPUT VOLTAGE[/TD]
[TD="colspan: 3"]9-32Vdc[/TD]
[/TR]
[TR]
[TD="colspan: 1"]MAX SOLAR INPUT[/TD]
[TD="colspan: 3"]23Vdc, 385W[/TD]
[/TR]
[TR]
[TD="colspan: 1"]OUTPUT CURRENT[/TD]
[TD="colspan: 3"]Input 9-11Vdc 20A,
Input 11-32Vdc 25A[/TD]
[/TR]
[TR]
[TD="colspan: 1"]BACK DRAIN ON AUX BATTERY[/TD]
[TD="colspan: 3"]9.5-10.5mA[/TD]
[/TR]
[TR]
[TD="colspan: 1"]CHARGER CONTROL[/TD]
[TD="colspan: 3"]Gel: 14.1V,
AGM: 14.4V
Wet: 14.7V,
Calcium: 15.4V[/TD]
[/TR]
[TR]
[TD="colspan: 1"]BATTERY CAPACITY[/TD]
[TD="colspan: 3"]75-300Ah[/TD]
[/TR]
[TR]
[TD="colspan: 1"]BATTERIES SUPPORTED[/TD]
[TD="colspan: 3"]Gel, AGM, Wet & Calcium[/TD]
[/TR]
[TR]
[TD="colspan: 1"]SMART ALTERNATOR[/TD]
[TD="colspan: 3"]

12V: Turn On: 12.2-20V 24V: Turn On: 24.4-32V

Turn Off: <11.9V Turn Off: <24V

[/TD]
[/TR]
[TR]
[TD="colspan: 1"]CONVENTIONAL ALTERNATOR[/TD]
[TD="colspan: 3"]

12V: Turn On: 13.4-20V 24V: Turn On: 26.8-32V

Turn Off: <12.8V Turn Off: <25.6V

[/TD]
[/TR]
[TR]
[TD="colspan: 1"]OPERATING TEMPERATURE[/TD]
[TD="colspan: 3"]-10