Charge controller and inverter leads hook up.

Collapse
X
Collapse
 
  • Page of 1
  • Time
  • Show
Clear All
new posts
Previous template Next
  • ONELUGNUT
    Junior Member
    • May 2012
    • 1
    #1

    Charge controller and inverter leads hook up.

    I am installing a xantrax charger/inverter and a outback fm80 controler onto a housboat. I do have the xantrax inverter is installed and was wondering if I can hook the fm80 ccharge controller battery leads to a post on the fuse and on onto the neg post of the xantrax inverter ? I am running 4/0 leads for the inverter
    Thank you all
    Tags: None
  • Mike90250
    Moderator
    • May 2009
    • 16020
    #2
    the controller should have it's own wires right to the battery. And the inverter too. trying to save a few $$ there will really be a pain.
    Powerfab top of pole PV mount (2) | Listeroid 6/1 w/st5 gen head | XW6048 inverter/chgr | Iota 48V/15A charger | Morningstar 60A MPPT | 48V, 800A NiFe Battery (in series)| 15, Evergreen 205w "12V" PV array on pole | Midnight ePanel | Grundfos 10 SO5-9 with 3 wire Franklin Electric motor (1/2hp 240V 1ph ) on a timer for 3 hr noontime run - Runs off PV ||
    || Midnight Classic 200 | 10, Evergreen 200w in a 160VOC array ||
    || VEC1093 12V Charger | Maha C401 aa/aaa Charger | SureSine | Sunsaver MPPT 15A

    solar: http://tinyurl.com/LMR-Solar
    gen: http://tinyurl.com/LMR-Lister

    Comment

    Previous template Next
    Working...